- [Bright & Last Longer] This PIR Sensor solar light has 400lm, 32LEDs, super bright to keep you safe when you back home at night. With 3.7V 2200mAh rechargeable batteries ,can last for 8 hours when full charged (over 6 hours).
- [PIR Motion Sensor] PIR is the abbreviation of passive infrared. It refers, human body or other objects that emit heat rays when moving within the sight of detector, will reach to the passive infrared sensor by optical.
- [Intelligent Light Mode] Turn on the switch to any mode you want, and it will be get charged during day and stored power to the rechargeable battery automatically.
- [Efficient Absorption & High Conversion] The LED solar panel has been updated to charge faster under sunlight to convert the energy into battery charging power.
- [Safe & Widely Applied] Wireless, much more safer when operate. No wire design makes it look more beautiful on the wall. Can be mounted with screws (included) to the wall of patio, porch, balcony, garden, garage, etc.
1.Solar panel specifications: 5.5V 2.2W, 17% conversion of energy efficiency
2.Lithium battery 3.7V, 4400mah,install 2 pcs of 18650 batteries
3.LED:3.5w 2835 Super bright LED x 32pcs.Single LED luminous flux: 18 lumens, lamp luminous flux approx 550 lumens.
A-The solar light will turn on automatically at night. The light brightness will just be half as induction function.
B-Human body induction+Power saving mode(dim light) function. When people go through the light sensing area, the light will be strong. And the light will turn to dim after people leave the induction area.
C-Human body induction function. When people go through the sensoring area, the light will be strong. And the light will turn off after people leave the induction area. The light can be extended for 10 seconds after inducted. Apply with repeated trigger induction function, start timing with the last induction.
5.Using charge and discharge protection circuit, optical sensing circuit.
6.Waterproof level: IP65
7.Charging time:>6 hours (1000W/©O lighting standard)
1.For the first time use, please insert the batter, and charge the solar product by placing it under direct sunlight for several hours before using.
2.When the solar product is not in use for a long period of time, please remove the battery and store in a cool or dry place to avoid the leakage. And recharge the battery every three months at a time, to ensure the battery not damaged or leakage during such a long period of time.
3.If the battery is exhausted, the light will be flashing, please recharge before normal use.
1 x Solar Powered LED Light
2 x Screws
2 x Expansion pillar-hinges
1 x User Manual